Installation Instructions
Model SC-931-1 Muzzle Down Setup Pump Shotguns Click here for PDF version
The Model SC-931-1 setup has been designed to secure a pump shotgun in front of the front passenger seat.
Installation:
Step 1. Preassembly: Bolt together all components as shown on the other side with carriage bolts, washers and nuts provided with the gunlock. Do not tighten screws.
Step 2. Place your pump shotgun in the gunlock and position the whole assembly right in front of the passenger seat so the barrel of the weapon points down into the foot cavity. Adjust the height of the mounting hinge (SC-9302) so the buttstock of the weapon is positioned nicely over the seat.
Step 3. Depending on the muzzle piece you ordered, you either have the SC-403 L Muzzle Support or the SC-9303 Flat Muzzle Support. Install SC-404 Muzzle Plug in either of muzzle supports and push up the plug into the barrel of the shotgun.
Step 4. Move the whole assembly around to find the best position. When satisfied, mark mounting hole locations for both muzzle support and SC-401 uprights. Check other side of floor board to avoid drilling into electrical wires or other lines and components.
Drill holes and install nuts and bolts.
Remove and reinsert the weapon several times making minute adjustments.
Tighten all nuts and bolts when satisfied.
Manual Key Override feature:
The gunlock has a manual - key operated - override feature to open the lock in case of electrical failure.
You do not have to use the key but it is there, ready to open the gunlock, should you ever need it. Just insert the key provided with the lock and turn it 90 degrees counter clockwise to open the lock and remove your weapon.
Note: the two ways to open the lock - electric and manual key operated - work independently.
PACKAGE CONTENTS
- 1 x Model SC-1 Pump Shotgun Lock
- 3 x 5/16-18 x 3/4" Carriage bolts
- 3 x 5/16" flat washers
- 3 x 5/16" lock washers
- 7 x Sheet metal screws
- 1 x push-button switch
- 1 x this installation instructions
We reserve the right to change our design and prices any time without notice.
HELP IS JUST A PHONE CALL AWAY
Should you have any problem installing or using Santa Cruz products, we are here to help you every step of the way.
Just give us a call at our toll free number (800) 847-5428 and we will be glad to help you with the installation, special part request or any other way you might need assistance.